Application
Line Voltage Thermostat
Thermostat Type
Digital, Non programmable, Fan coil
Power Method
C-wire only
Wi-Fi Enabled
NO
Communication
NO
Heat-Cool Changeover
Auto, Manual
Sensor Type
NTC 20 kohm
Temperature Accuracy
±2.0°F at 70°F
Operating Relative Humidity
5% to 90% RH, non-condensing
Operating Ambient Temperature
0° to 120°F (-18° to 49°C)
Set point Temperature Range
32°F to 99°F
System Settings
Heat/Cool manual/auto
Fan Settings
Auto, On
Product Height
3-13/16in.
Product Width
5-13/16in.
Color
White
- Simple, intuitive user interface
- Pre-installed lead wires for fast installation
- Backlight display permits easy viewing in any light.
- Four buttons allow manual control of system operation, fan speed, and temperature setpoint adjustment.
- Digital display of ambient temperature, setpoint, heating or cooling mode, fan status, and remote setback
- Proportional plus Integral (P+I) control algorithm for precision temperature regulation.
- Single Setpoint and Heat/Cool setpoint methods for 4-pipe Auto Changeover.
- Adjustable maximum heating and minimum cooling setpoint limits using range stops.
- EEPROM permanently retains user settings, including setpoints, during power loss (no batteries required).
- Selectable °C or °F display via Setup button on thermostat.
- Displayable pipe sensor temperature readout to aid in troubleshooting.
- Selectable to allow the fan motor to always begin on high speed to ensure sufficient torque at startup.
- Option to wire a remote indoor temperature sensor.
- Freeze protect algorithm turns on heat when needed.
- Economy Setback options via dry contact or Activity Sensing