Brand
Aspen Manufacturing
Type
Wall/Closet Air Handler Indoor
Nominal Tonnage
2.5 Ton
BTU Cooling
30000 BTU/Hr Cooling
BTU Heating @240V
32800 BTU/Hr Heating
Heat kW @ 240V
10 kW
CFM Rating
1000 cfm
Voltage
208/240 V
Total Amps @ 240V
53 A
Airflow Stages
1 Stage
Motor
PSC 1/3 hp @ 240V
Dimensions
24 Inch Width x 21 Inch Depth x 36 Inch Height
Connection Size
3/8" OD Liquid 3/4" OD Suction
Metering Device
TXV HP-A/C R410A
Phase
1 Phase
Configuration
Vertical Upflow
- Offset hanging brackets attach to unit and wall to allow hanging inside closet.
- Less than 2% air leakage from cabinet when tested in accordance with ASHRAE standard 193
- Sturdy, fully insulated galvanized steel cabinet
- Electronic circuit board provides 30 seconds ON/FF blower time delay extracting more heat/cool from the coil
- Automotive-style pull fuse protection on the circuit board to provide low voltage and transformer protection.
- Direct drive multi-speed blowers circulate air quietly and efficiently
- Swing mounted blowers can be easily removed for service
- High efficiency rifled copper tubes with enhanced aluminum fins provide maximum heat transfer
- All coils immersion tested a 500 psi then nitrogen pressurized and factory sealed for maximum reliability
- Galvanized metal drain pan with bottom primary and secondary drain connections or alternate right side primary.